Iron Park Minsk Logo

TOOL

FOR

FACTORIES

+375 17 337-39-15 (14)

+375 29 309-58-30

info@ironpark.by

Minsk city, Zhukov Avenue 44, 506

9:15-17:00

DAY OFF

RU

WINSTAR CUTTING TECHNOLOGIES

Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |

PROFESSIONALLY AND ECONOMICALLY

OPTIMIZATION AND VERSATILITY

QUALITY GUARANTEE AND RELIABILITY

Competitive cost
Wide application.
Quality and resource of work.

Winstar Cutting Technologies Corp. The Taiwanese company, founded in 2008, is a specialist in the production of carbide inserts and body tools. Winstar has not only become one of the most successful companies in Taiwan, but is also widely known in Europe, due to the ideal price-performance ratio of the tool. The supplier of raw materials used in production is the United States. Our own research and development center is engaged in the development of technologies and their introduction into production. Since its inception, Winstar has specialized in the design and manufacture of high quality cutting tools. Today it has an instrumental nomenclature with more than 4400 different types of units.

Winstar Cutting Technologies Corp. The Taiwanese company, founded in 2008, is a specialist in the production of carbide inserts and body tools. Winstar has not only become one of the most successful companies in Taiwan, but is also widely known in Europe, due to the ideal price-performance ratio of the tool. The supplier of raw materials used in production is the United States. Our own research and development center is engaged in the development of technologies and their introduction into production. Since its inception, Winstar has specialized in the design and manufacture of high quality cutting tools. Today it has an instrumental nomenclature with more than 4400 different types of units.

The Winstar tool has competed with such market giants as Sandvik, Korloy and others in a fairly short period from the moment the company entered the market until today. The excellent price-quality ratio makes the products of the Winstar company the most demanded and attractive for the consumer in the current market conditions. The Winstar tool is used at the production facilities of such concerns as Fiat, Toyota, Ferrari, etc.

Winstar products today are:

• Solid carbide insert for milling and turning operations.

• Solid carbide milling cutters

• Axial cutting tool

• End mills with replaceable TV inserts, radius cutters, slot and shoulder cutters, and plunger milling.

• IASX milling systems

SECTIONS WINSTAR PRODUCT CATALOG

Milling

Turning

Solid carbide milling cutters

Axial tool

Turning and parting inserts:
- Positive turning inserts
- Negative turning inserts
- Parting Plates
- Turning and cutting off tools
- Accessories
- Solid carbide drills
- Indexable drills
- Replaceable drill inserts
- Center drills
- Sweep
Milling inserts
Plates and bodies:
Solid carbide
end mills:
- For hardened steels
- For high feed milling
- For alloy steel
- For stainless steel, titanium, Inconel and molds
- For non-ferrous metals
- Shoulder milling.
- Face mills
- Profile cutters
- High feed face mills
- Spiral (corn) cutters
- Disc cutters
- Chamfer cutters

Why Winstar?

Your order will receive personalized attention from our sales staff. We offer full technical support for our products and are always a phone call away. Your satisfaction is very important to us. We replenish our warehouses to support our complete product range. This means we probably have what you need ready for shipping today.

Taiwanese quality

Your satisfaction is 100% guaranteed! Our full line of end mills, drills, toolholders and inserts can rival or surpass any premium cutting tool brand on the market

Optimized carbide grades

Maximum cutting performance is only achieved when the carbide grade is ideally matched to the specific application needs.

Excellent sanding quality

Research to improve surface quality remains an area of ​​constant technological progress. Because edge quality determines tool life and cutting ability, excellent grinding quality is critical. WINSTAR offers the latest Swiss and German sanding technology for superior surface quality.

Innovative tool geometry

Maximum cutting capacity cannot be achieved using only standard multi-tool geometries. Effective chip formation and removal is critical for optimal cutting performance. These geometries are designed to handle a wide range of cutting forces and provide the highest cutting performance for aeronautical applications. As a renowned supplier of specialty tools, WINSTAR has the engineering know-how to develop innovative tool geometries for the best cutting performance.

Advanced coating technology

We are committed to providing our customers with thoughtful precision and excellence. Highest tool life and maximum tool performance require advanced coating technology as this highly innovative field continues to evolve rapidly.

Solid Carbide End Mills

H700 Series Winstar Cutting Technologies | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by
H680 Series Winstar Cutting Technologies | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by
H650 Series Winstar Cutting Technologies | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by
G550 Series Winstar Cutting Technologies | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by

H680 series for hardened steel, up to HRC 65

 

- For hardened steel, HRC 50 ~ 65

- Ultra-grained carbide

- High precision and productivity

- SICO-TH coating

 

G550 series for mold and alloy steel, up to HRC 55

 

- For molds, alloy steel and cast iron, HRC 30 ~ 55

- Micro-grained carbide

- UNICO coating

 

H700 series for hardened steel, up to HRC 70

 

 For hardened steel, HRC ~ 70

- Ultra-grained carbide

- High speed cutting

- SICO, NACO coverage

 

H650 series for hardened steel, up to HRC 60

 

- For hardened steel, HRC 40 ~ 60

- Ultra-grained carbide

- Coating SICO, ARCO

 

 

 

EUROS Winstar Cutting Technologies Series | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by
G450 Series Winstar Cutting Technologies | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by
M500 Series Winstar Cutting Technologies | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by
A200 Series Winstar Cutting Technologies | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by

G 450 series for steel, up to HRC 48

 

- For steel, alloy steel, cast iron, aluminum alloys (Si> 15%), HRC 15 ~ 48

- Micro-grained carbide

- UNICO coating

 

 

A200 series for graphite

 

- For graphite

- Micro-grained carbide

- Diamond coating DIA

 

 

 

EUROS series for milling with high filing

 

- Wide application, high feed, for hardened and pre-hardened

hardened steel, stainless steel, up to HRC 60

- Small chamfer or small radius edge

- Coating UNICO, SICO

 

M500 series for stainless steel, titanium

 

- For stainless steel, hard-to-cut materials, HRC 20 ~ 50

- Finishing of molds

- ARCO Coating

 

 

 

A100 Series Winstar Cutting Technologies | Milling, turning, carbide milling cutters. Iron Park, Minsk www.ironpark.by
Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by | 

WinMaster Series Replacement End Mills

 

- For common steel, stainless steel, cast iron, HRC 40 ~ 60

- Micro-grained carbide

- SICO coverage

- Replacement end mills

 

A100 series for aluminum alloys

 

- For non-ferrous metals, aluminum, aluminum alloys, copper, HRC <18

- Micro-grained carbide

- Large bend angle, offers excellent and

stable finish surfaces

 

Milling inserts

Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |
Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |
Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by | 
Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |

Unique geometry "Type Z" minimizes vibration !!!

 

- SNMX inserts with 8 economical cutting edges

- Ensures minimum loads and longest tool life

- High performance in the processing of various materials

CXSN Face Milling

The new economical solution for high feed milling !!!

 

- WNMX inserts with 6 economical cutting edges

- Double-sided negative geometry designed for durability

cutting edge

- Designed for complex processing

CXWN High Feed Face Milling

Optimized end mill solution for a wide range of applications !!!

 

- XNMX Inserts with 6 Economy Cutting Edges

- Low cutting resistance

- 90 degree shoulder milling

High feed milling increases productivity !!!

 

- BNMX inserts with 4 economical cutting edges

- Minimum cutting force for maximum productivity!

- Optimum insert geometry, wide range of applications

CXXN Shoulder milling

CXBN High Feed Face Milling

Milling bodies

- Shoulder milling

- Face mills

- Profile cutters

- High Feed Face Mills

- Spiral (corn) cutters

- Disc cutters

- Chamfer cutters

 

Wide range of milling bodies from Winstar

Tool systems and accessories

- Carbide adapter

- BT Mandrels

- Accessories for cutters.

Tool systems and accessories

Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |

Turning inserts

Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |

Positive plates

- Choice of over 50 types

- Coating layer thickness> 1 μm for various applications

- Longitudinal, profile turning and face trimming

- Range of application - from semi-rough to rough turning

- Choice of over 25 types

- Thick or normal coating layer for various applications

- For boring and profiling turning

- Range of application - from semi-finishing to rough turning

 

Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |

Negative plates

- Choice of over 50 types

 

- Coating layer thickness> 1 μm for various applications

 

- Longitudinal, profile turning and face trimming

 

- Range of application - from semi-rough to rough turning

Lathe Cutters

Turning holder (cutter) for external machining

Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |

Turning holder (cutter) for internal machining

Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |
Winstar Cutting Technologies (Taiwan). Carbide tool. Iron Park LLC Minsk, Zhukov Ave. 44 office 506 | www.ironpark.by |

DOWNLOAD CATALOGS (pdf)

 AVAILABLE IN STOCK

A wide range of tools in stock and a quick search on order (from 7 days).

EFFICIENCY CALCULATION

Development and optimization of technological solutions for turning and milling metal processing.

INDIVIDUAL APPROACH

Depending on the technical, economic goals and resources, we carry out an individual approach to each client.

Our company specializes in the complex sale of metal-cutting, diamond tools for mechanical engineering. We carry out the development of technological solutions for turning and milling metal processing.

The whole range of metal-cutting, abrasive, measuring, locksmith tools and equipment.

Официальный поставшик Lamina Technologies в РБ

LLC IRON PARK

 VAT 192980654

We are in social networks