+375 17 337-39-15 (14)
+375 29 309-58-30
Minsk city, Zhukov Avenue 44, 506
Since the beginning of 2021, we have been expanding our product range. We will consistently present a new product line /
IP TOOLS is a high quality tool from Asian manufacturers, coordinated production processes using the most modern machine tools, ensuring the highest precision.
Coating processes using the latest technology optimize the already long service life of the high performance IP TOOLS tools.
March 29, 2021
With the increasing demands on the performance of new taps, IP Tools has taken this issue to the production level. The result was the creation of a new concept for threading.
In our IP TOOLS taps, all internal threads are tapped using the center cutting teeth. The remaining threaded portion is only used to guide the tap through the hole. With a full thread profile, friction of the leading part occurs in the finished thread. Friction will shorten the life of the tap and, among other things, can lead to seizure at tight tolerances.
Also, our IP TOOLS taps are ground fully automatically on modern machines directly from solid cylindrical blanks. Thanks to state-of-the-art CBN grinding technology, we achieve high edge and shape precision.
Thanks to the new geometry, not only a high precision of the tap is achieved, but also a longer service life.
Reduced friction in threads.
Reduced risk of breakage.
Minimal risk of thread deformation.
Improved chip evacuation.
thanks to polished grooves.
March 29, 2021
IP TOOLS offers various tool coatings.
TiN coating has been the first choice for tap coating for many years
and has established itself as a “multi-sided” coating. The main properties are reduction coefficient of friction and adhesion of material on the cutting edges.
AlTiN coating is mainly used for high speed metal processing.
Alcro coating has a high hardness combined with excellent temperature resistance and ductility.
The high hardness of this layer, combined with oxidation resistance at high temperatures, allows the tool to be used in difficult machining, where extreme temperatures occur, both at the cutting edges and during chip evacuation. With this coating, "dry" processing or with a minimum amount of coolant is possible.
Alcro coating has high hardness combined with excellent temperature resistance and ductility. It has proven itself ideally in metal processing and carries the properties of high tool wear resistance and high quality.
The chip angle determines the subsequent removal of chips from the material, the cutting ability of the tap. Therefore, it must be adapted to the mechanical properties of the material to be processed. It is for this reason that materials are grouped into groups that have the same or similar mechanical properties when processed.
For a better and more convenient use of our tools, IP TOOLS high-performance machine taps are marked with colored rings according to the materials to be processed, where each color is associated with a specific group of materials to be processed.
Well-machined steels with longitudinal strengths in the range 400-900 N / mm² can be machined with standard machine taps.
Special adaptation of the tool geometry to the special properties of your material or special working conditions is possible (on request)
When threading, follow the rule: 1 - 2 turns forward (cut the thread) - 0.5 - 1 turn back.
When threading, chips will inevitably accumulate in blind holes, it is necessary to unscrew the tap and remove metal waste from the hole and from the tap.
If the tap was removed completely, then be careful when screwing it in again or when passing the next number. It is necessary to hit the already cut thread and not cut it.
The diameter of the drilled hole must match the diameter of the thread (table 1):
|Thread diameter||Thread diameter||Thread diameter||Thread diameter|
The shape of the intake part depends on the type of hole in the material. Whether it is an SCR "through hole (a hole in a part that goes through the whole part) or a blind hole"
passes through the part, but only has a certain depth).
In practice, intake shapes from A to D have proven to be effective.
+ Application table # 1 (for taps with blue color coding)
+ Application table No. 2 (for taps with red, yellow, white color coding)
A wide range of tools in stock and a quick search on order (from 7 days).
Development and optimization of technological solutions for turning and milling metal processing.
Depending on the technical, economic goals and resources, we carry out an individual approach to each client.
Our company specializes in the complex sale of metal-cutting, diamond tools for mechanical engineering. We carry out the development of technological solutions for turning and milling metal processing.